Radium Submersible Fuel Tubing 5/16in x 8.2in
$19.95
$18.95
RAD20-0875
Fabrication
Hoses
Under $100
PTFE submersible fuel tubing. 5/16" inside diameter, 8.2" overall length.
Radium 2-Way Threaded Hose Separator Clamp
$9.95
$9.45
RAD20-0817
Brackets
Fabrication
Under $100
Single clamp with two positions. Anodized aluminum.
Radium Engineering Nissan S13 SR20DET 10AN Male Press-Fit Valve Cover Fitting - Exhaust Side
$59.95
$56.95
RAD20-0811
Fabrication
Fittings
Under $100
Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.
Radium RB26DETT Valve Cover Intake and Exhaust 12AN Male Press-Fit Fitting
$59.95
$56.95
RAD20-0809
Fabrication
Fittings
Under $100
Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.
Radium Engineering Submersible Fuel Tubing 3/8in x 17.7in Long
$19.95
$18.95
RAD20-0795
Fabrication
Hoses
Under $100
Submersible PTFE tubing for use with submerged fuel pumps. 3/8" ID.
Radium Engineering Toyota MK5 Supra Fuel Line Retaining Kit
$269.95
$256.45
RAD20-0762
Brackets
Fabrication
Brackets for holding aftermarket high-flow fuel lines to underside of the GR Supra. Uses all factory mounting locations.
Radium Engineering V2 Quick Connect 19mm Male to 10AN Male Straight
$39.95
$37.95
RAD20-0758
Fabrication
Fittings
Under $100
Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.
Radium V2 Quick Connect 19mm Male to 10AN Male 90 Degree
$59.95
$56.95
RAD20-0748
Fabrication
Fittings
Under $100
This swivel fitting installs into the BMW B58 valve cover found on the A90/A91 GR Toyota Supra. It allows connection of a 10AN hose.
Radium Engineering Distribution Block 12-10-10-10 With Fittings
$69.95
$66.45
RAD20-0737
Fabrication
Fittings
Under $100
High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative...
Radium Quick Fill Dump Can Standard Filler
$199.95
$189.95
RAD20-0697-00
Fabrication
Filler Necks
Molded 6 gallon dump can. Compatible with all types of fuel. Includes standard fill spout and accessories. Semi-transparent white color.
Radium 8AN ORB to 6AN ORB Swivel Union Fitting
$29.95
$28.45
RAD20-0686
Fabrication
Fittings
Under $100
Replacement fitting for Radium Engineering Direct Mount Regulators (Gen 2 design).
Radium Engineering 10AN Male Swivel Banjo 17.5mm Press Fit
$59.95
$56.95
RAD20-0609
Fabrication
Fittings
Under $100
Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.
Radium Dry Break Dust Cap
$39.95
$37.95
RAD20-0604
Fabrication
Filler Necks
Under $100
For use with Radium dry-break fuel cell fill receivers. Includes lanyard
Radium Engineering 3/8in SAE Female to 6AN Male Low Profile Elbow
$29.95
$28.45
RAD20-0601
Fabrication
Fittings
Under $100
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile Elbow
$29.95
$28.45
RAD20-0600
Fabrication
Fittings
Under $100
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering 10AN ORB to .75in Barb Roll Over Valve
$24.95
$23.70
RAD20-0594
Fabrication
Fittings
Under $100
Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an...
Radium Engineering Fuel Cap Remote Mount Vented
$39.95
$37.95
RAD20-0548-V
Fabrication
Fuel Lines
Under $100
Replacement fuel cap only. For use with Radium fender mounted fill flange. Includes O-ring.
Radium Engineering Universal Check Valve Kit 10AN
$59.95
$56.95
RAD20-0534-10
Fabrication
Fittings
Under $100
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Engineering Universal Check Valve Kit 6AN
$59.95
$56.95
RAD20-0534-06
Fabrication
Fittings
Under $100
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Remote Mount Fill Neck - Straight - 1.5in Barb
$79.95
$75.95
RAD20-0527
Fabrication
Filler Necks
Under $100
Straight fill neck for 1.5" ID fill hose. 6-bolt flange. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper. Not...
Radium Engineering 08-21 Subaru Fuel Line Retaining Kit
$99.95
$94.95
RAD20-0526
Brackets
Fabrication
Under $100
Bolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.
Radium Engineering 10AN Male Swivel Banjo - 11.8MM Press Fit Fitting
$59.95
$56.95
RAD20-0509
Fabrication
Fittings
Under $100
Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.
Radium Engineering Fuel Cell Vent Kit - 12AN
$59.95
$56.95
RAD20-0484-12
Fabrication
Fuel Lines
Under $100
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Fuel Cell Vent Kit - 8AN
$59.95
$56.95
RAD20-0484-08
Fabrication
Fuel Lines
Under $100
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Mitsubishi EVO X Fuel Tank Pressure Plug
$19.95
$18.95
RAD20-0421
Fabrication
Fittings
Under $100
For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In...
Radium Engineering Hose Separator Clamp - 2 Way
$14.95
$14.20
RAD20-0417
Clamps
Fabrication
Under $100
CNC machined aluminum. For 0.39 diameter tube. M6 screw included.
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
$19.95
$18.95
RAD20-0395
Fabrication
Hoses
Under $100
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
Radium Engineering Fuel Pressure Test Kit
$29.95
$28.45
RAD20-0392
Fabrication
Fittings
Under $100
Line and fittings for remote mounting a pressure gauge or pressure transducer. 1/8NPT compatible. Gauge sold separately.
Radium Engineering Filler Neck Block-Off Kit
$34.95
$33.20
RAD20-0360
Fabrication
Filler Necks
Under $100
Radium Engineering Filler Neck Block-Off Kit
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile
$24.95
$23.70
RAD20-0290
Fabrication
Fittings
Under $100
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile
Radium Engineering 3 Into 1 Distribution Block w/ Fittings
$89.95
$85.45
RAD20-0237
Fabrication
Fittings
Under $100
Radium Engineering 3 Into 1 Distribution Block w/ Fittings
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
$49.95
$47.45
RAD20-0218
Clamps
Fabrication
Under $100
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 12.8in Long
$19.95
$18.95
RAD20-0195
Fabrication
Hoses
Under $100
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 12.8in Long
Radium Engineering Venturi Jet Pump Kit
$89.95
$85.45
RAD20-0180
Fabrication
Fittings
Under $100
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering 5/16in Barb to 6AN Bulkhead Fitting
$19.95
$18.95
RAD20-0170
Fabrication
Fittings
Under $100
Requires a 9/16-18 threaded hole with chamfer to be drilled into the mating part for sealing. Barb is 8.5mm
Radium Engineering Fuel Cell Fill Cap Vented
$34.95
$33.20
RAD20-0148-V
Fabrication
Filler Necks
Under $100
Machined aluminum fill cap. Integragted vent with roll-over protection. O-ring included.
